PMUC approval: compliant analysis for entry into a power plant

Home • PMUC control and approval • PMUC Approval

Secure entry into a power plant with compliant PMUC analysis

A product’s entry into a power plant may require the preparation of a file demonstrating its compliance with the applicable requirements. Manufacturers must identify the characteristics to be checked, select suitable test methods and provide analytical results consistent with the product’s formulation, raw materials and intended use. Insufficient preparation of the control plan may lead to additional analysis, longer processing times or the inability to determine the expected compliance.

Filab laboratory supports manufacturers with their PMUC approval procedures by defining a testing programme tailored to materials, resins, coatings, adhesives and technical products. The services are designed to produce usable analytical data to support the power plant entry file.

Define the controls according to the product type

The content of a compliant PMUC analysis programme depends on the product and the criteria provided by the applicant. Filab laboratory can work on organic products, polymers, composites, coatings, paints, sealants, adhesives and resins. Reviewing the available documentation and the characteristics sought helps direct the controls towards relevant tests.

Build a testing plan tailored to your file

Filab laboratory reviews the technical information provided to clarify the analytical objective: formulation control, comparison with a reference, material characterisation, compound detection or property verification. The programme is then adjusted to the level of justification expected for entry into the power plant and to your project deadlines.

Use complementary characterisation techniques

Depending on the requirements, Filab laboratory combines spectrometry, chromatography, microscopy, thermal analysis and elemental or molecular characterisation techniques. The complementary nature of these methods makes it possible to investigate the composition, morphology, fillers, additives, degradation products or thermal properties of the product under study.

Have Filab laboratory support your approval application

At Filab laboratory, support begins with an assessment of your needs: product type, known composition, customer requirements, available technical documents and test objective. This phase makes it possible to build a targeted analysis plan and define the representative samples to be collected.

The results are provided in a test report detailing the methods used, analysis conditions and results obtained. For resin-based materials, discover our dedicated support for PMUC approval and control of resins.

Characterise the composition and behaviour of materials

Filab laboratory’s capabilities include studying composition, identifying constituents, detecting targeted substances and evaluating certain physicochemical properties. Thermal analysis can help characterise the stability or transitions of a material; explore the capabilities of the TGA analysis laboratory. Structural and surface investigations can also draw on the expertise of the TEM analysis laboratory.

Ensure sample and result traceability

Each study is based on identifying the samples received, defining the tests and recording the testing conditions. The test report compiles the results associated with the methods used. This reporting makes it easier for your quality, regulatory, R&D and purchasing teams to use the data.

Obtain results that can be used for decision-making

For composite materials, specific investigations can be defined to characterise the matrix, reinforcements and interfaces. Explore the possibilities of carbon-epoxy composite analysis.

Get your PMUC testing project underway

Provide the product description, the requirements to be met, the available technical documents and the desired timeframe. Have representative samples analyzed by Filab laboratory. Receive a technical and financial proposal tailored to your project. Obtain structured analytical results to complete your submission for approval by the central purchasing organization.

Frequently asked questions

How can you prepare a product’s PMUC approval before it enters a power plant?

Preparing a PMUC approval application involves gathering the requirements applicable to the product, defining the characteristics to be checked and establishing a testing plan with Filab laboratory. The samples must be representative of the product intended to enter the power plant. The analysis reports obtained are then used to document the technical file.

What tests can be carried out for a PMUC file?

Tests are selected on a case-by-case basis according to the product, its formulation, application and the requirements provided. They may include chemical characterisation, constituent identification, thermal analysis, structural or surface examinations and the detection of targeted substances. Filab laboratory defines the relevant scope before the analysis begin.

How does Filab laboratory define the PMUC analysis plan?

The analysis plan is defined based on the requirements provided, the product type, the available information about its composition and the purpose of the file. Filab laboratory works with your teams to select the tests, specify the number of samples and organise receipt of the specimens.

What technical resources can be used to characterise a material intended for a power plant?

Filab laboratory has complementary techniques for studying materials and technical products: chemical and elemental analysis, chromatography, spectrometry, microscopy and thermal analysis. The selection of resources depends on the characteristics to be demonstrated and the level of information required for the PMUC file.

How can I request a quote for PMUC approval testing?

To request a quote, send Filab laboratory the product designation, its matrix, the criteria or specifications to be considered, the quantities of samples available and your deadline. A testing proposal tailored to your PMUC approval process can then be prepared.