News

Mechanical testing: determination of toughness by the SEVNB method | ISO 23146

In many industries (aerospace, defense, energy, medical devices, and electronics), ceramic and brittle materials are used for their exceptional performance. But one key question remains: how do we measure their resistance to fissure propagation?

This is precisely the objective of fracture toughness determination. Among the recognized methods, the SEVNB method is now a benchmark for characterizing brittle materials according to ISO 23146.

céramique technique

What is the toughness of a material?

Toughness (K1c) is a material’s ability to resist the propagation of an existing crack. While hardness measures resistance to penetration, toughness determines whether a micro-crack invisible to the naked eye is likely to cause the part to fail in service.

The SEVNB method: the accuracy of the "V-Notch"

The SEVNB (Single-Edge V-Notched Beam) method is acclaimed for its repeatability and accuracy on monolithic ceramics.

The principle of the test

The test uses a parallelepiped-shaped specimen into which a very sharp V-shaped notch is machined. This notch simulates a pre-existing crack with an extremely small root radius.

  • Preparation: a primary notch is cut and then refined using an abrasive paste (often diamond) to obtain a root radius of less than a few micrometers.
  • Loading: the specimen is placed on a 3- or 4-point bending fixture.
  • Faulting: increasing force is applied until complete failure.
Why choose ISO 23146?

Compared to other techniques such as Vickers indentation (IF), the SEVNB method offers major advantages:

  • Reliability of results: it is less subject to variations in visual interpretation than indentation methods.
  • Adaptability: it is applicable to a wide range of advanced technical ceramics (alumina, zirconia, carbides).
  • Conformity to standards: it is a reference method for qualification dossiers of advanced materials (aerospace, medical, nuclear).

FILAB laboratory's support in mechanical characterization

Machining a V-groove notch according to ISO 23146 requires high-precision metrological expertise. At the FILAB laboratory, we combine our expertise in metallurgy and ceramics to offer you a comprehensive service:

  • Rigorous preparation of test specimens (polishing and precision notching).
  • Performance of bending tests on calibrated tensile/compression testing machines.
  • Fracture surface analysis by SEM (Scanning Electron Microscopy) to understand the origin of the fracture.
  • Interpretation of the results in light of the operating constraints of your parts.

In what context should the toughness of a ceramic be measured?

Toughness measurement is a crucial indicator for understanding a material’s behavior in the face of fissure propagation. In many industrial environments, the presence of microscopic defects is unavoidable. The challenge, therefore, lies not only in evaluating overall mechanical strength but also in assessing the material’s ability to tolerate these defects without sudden failure.

Determining toughness thus helps ensure the reliability of the design of critical components, particularly when subjected to high mechanical stresses or harsh operating conditions. It also provides a valuable tool for comparing different materials or microstructures during development or qualification phases.

Furthermore, these tests provide valuable information for optimizing manufacturing processes, whether related to sintering parameters, heat treatments, or raw material selection. Finally, knowledge of this property allows for anticipating the risk of failure in service and improving the overall reliability of components.

Tenacity thus emerges as a key parameter for assessing the robustness of fragile materials and ensuring their safe use in demanding industrial applications.

Conclusion

Mastering toughness using the SEVNB method is essential to guaranteeing the durability of ceramic components. By complying with the requirements of ISO 23146, FILAB helps you secure your innovations and validate the conformity of your most technical materials.

bending tests

We are available to answer your questions.

Frequently asked questions

What is the difference between fracture toughness, mechanical strength and hardness in a ceramic?

Fracture toughness characterizes resistance to crack propagation under defined conditions. Mechanical strength corresponds to the stress at failure in a given test, while hardness measures resistance to indentation. These properties are complementary: a hard ceramic does not necessarily have high fracture toughness, and a strength value cannot replace a toughness measurement.

What is the principle of the SEVNB method according to ISO 23146?

The method uses a test specimen with a sharp V-notch, which is then subjected to bending until fracture. ISO 23146:2012 describes a four-point bending setup. The measured load, the specimen geometry, and the notch geometry all affect the result; compliance with the procedure and the validity criteria must be verified.

Is the SEVNB method suitable for all technical ceramics?

Its scope of application must be verified for the material under study. ISO 23146:2012 applies to certain monolithic ceramics and does not recommend its use for yttria-stabilized tetragonal zirconia polycrystals, known as Y-TZP. Some very tough or soft ceramics may also present difficulties. Consult the scope of application of ISO 23146.

Why check notch geometry before a SEVNB toughness test?

The notch depth and sharpness influence the stress field and crack initiation. A notch that is too blunt or improperly prepared can bias the apparent toughness. The notch dimensions, preparation, and quality must therefore be checked and documented, in relation to the ceramic’s microstructural characteristics and the requirements of the method.

What can examination of the fracture surface after a SEVNB test reveal?

Fractographic examination, particularly by SEM where relevant, helps identify the origin of the fracture, local defects, or microstructural features. It complements load and geometry measurements and can help investigate an atypical result. It does not replace the test validity criteria, nor is it sufficient on its own to calculate a compliant toughness value.

Laboratory specializing in analysis and expertise for industrial companies

+140 employees
+140 employees here to listen to you
5,200 m² laboratory
5,200 m² laboratory +99% of services carried out in-house
Accredited laboratory
Accredited laboratory COFRAC ISO 17025
+2,200 clients
+2,200 clients in France and abroad

Contact us

Our services are reserved for professionals.